4.24 DESIGN REQUIREMENTS FOR RACKS, PAN TRUCKS AND DOLLIES
4.24.1 Definitions
4.24.1.1 Product Zone, as defined in Section 2.11, shall include:.
4.24.1.1.1 All parts of caster mounted racks exclusive of casters
and mounting bolts.
To
comment or make suggestions regarding this standard or begin
a new discussion on this standard click here.
4.24.1.1.2 All parts of suspended racks exclusive of drip pans,
hanger bar and trolley.
To
comment or make suggestions regarding this standard or begin
a new discussion on this standard click here.
4.24.1.1.3 All parts of trucks and dollies exclusive of casters
and underside of platforms.
To
comment or make suggestions regarding this standard or begin
a new discussion on this standard click here.
4.24.2 Specific Design Requirements
4.24.2.1 Suspended racks with the support over the product zone
shall be equipped with a drip pan which protects the product zone
and can be readily removable for cleaning.
To
comment or make suggestions regarding this standard or begin
a new discussion on this standard click here.
4.24.2.2 Supports for shelves or pans shall be considered a product
zone and shall be readily accessible or readily removable for cleaning.
To
comment or make suggestions regarding this standard or begin
a new discussion on this standard click here.
4.24.2.3 Fastening devices used to attach the running gear to
racks, pan trucks and dollies shall not extend through the base,
platform or bed.
To
comment or make suggestions regarding this standard or begin
a new discussion on this standard click here.
4.24.2.4 Mounting brackets for handles, wheels and casters shall
be designed and constructed to eliminate pockets or areas difficult
to clean.
To
comment or make suggestions regarding this standard or begin
a new discussion on this standard click here.
4.24.2.5 The underside of the pan truck bed should be designed
and constructed to eliminate open horizontal flat surfaces other
than the bottom of the truck bed.
To
comment or make suggestions regarding this standard or begin
a new discussion on this standard click here.